Tamagotchi V3's sound is busted

[Zachary Konreignes]

Okay, so my V3 (first Tama ever) has an issue. The sound wires came off when I was debugging. This actually occurred about a year ago but I didn't try to do anything about it until now. I still have the original wires that connected to the speaker. I've been told I can reconnect it with a soldering iron but I don't believe I have one, nor do I think I can get one anytime soon. So if there's any alternative I could try, it would really be helpful. Thanks

Also, please no "That's what you get for debugging" replies. None of my Tamagotchis are debugged anymore and I'm not planning on doing it again.

EDIT: Here's a photo of my Tamagotchi's circuit board.

 

[webster04]

Soldering them on would be the only way of getting the sound to work again, or at least as far as i know it's the only way of getting it to work again... you could try stripping the end of the wire to get the metal wiring to show and use duct tape to tape them back on though since i had to do that with my music star when not only the wires but solder came off.

 

[Iceland <3]

If you have a woodburning tool you can put on a fine tip and get a coil of solder, you can melt the solder onto the wires.

 

[ChamametchiandMametchi]

I'd have to agree with webster and Iceland. you have to solder the wires with soldering iron. after you get the wires soldered in, it should work.

 

[jzwolf530]

You will have to solder the wires. I've heard of people using electrical tape but it's hit or miss and only a temporary fix.

 

[Bubbles11]

Solder the wires. If you have someone who knows how to do it, it's quite an easy fix.