Screw removal

[tamadot12]

Any advice on removing V4 screws? From my experience, the V4.5 was evil.

Also, how do you/ where can you go to remove a somewhat stripped screw? I can't seem to get mine out.

 

[jordboss]

Any advice on removing V4 screws? From my experience, the V4.5 was evil.

Also, how do you/ where can you go to remove a somewhat stripped screw? I can't seem to get mine out.

I don't mean to sound rude or anything, but have you tried searching for other topics that answer your question. There are several around that have reasonable answers that would solve your problem. Its really easy to search for topics,

At the top of the page there is a search Icon. Type what you are searching for in the box and select to appropriate category and then press the search icon.

I will provide you with a few links that will explain how you can get the stripped screw out of your Tamagotchi.

Link 1

Link 2

I hope that I have helped you.

Regards

Jordboss

 

[tamadot12]

Again, NOT THE BACK COVER! What do jewelers do, before I actually go?

 

[OldSchoolTama]

*Topic moved to 'What's On Your Mind'*

 

[SailorRosette]

Inside the tama? Those tiny ones? A very tiny screwdriver with 4 parts, not flat... Those can help. I have a hard time with those sometimes... If you really want those stripped ones out.... Apply pressure and hope you don't hurt the screw more...

I've suggested gluing the screwdriver to the screw and twist it once its dry... But I'm not sure if it will work on the inside or not..................... Maybe you can get some small pliers that fit around and twist them out. (Try an art store that sells beads/wire. To buy them)

Otherwise, the outside one.... Which I'm sure it isn't.... Small pliers that are skinny....

(BTW, The best skinny pliers I've used are Cutterbee pliers. They are yellow and black...White/Green box... probably more then you want to spend but they work on many other things where normal pliers can't since they are longer too, They have a point too.)

 

[Violetchilluvr3]

I would just suggest going to a jeweler's and having them take it out. You know jewelers and their mystical ways.

Good luck!

Violetchilluvr3

 

[jordboss]

Hello, Did you read my other post at all. It tells you how to get a striped screw out of the device. It works the same for the back cover and the unside ones (the 4 smaller screws) I know your pain. My sisters V3 has got sutch a stripped screw that it is impossible to get it out. Even a jewler cannot remove it for her, she doesn't mind though because she said that tamagotchi get on her nerves.

 

regards,