Hello! This topic is all about how to keep your Tama's outer shell and screen clean, clear and good as new!
TOP TIPS
1. Wear is unavoidable; if you run a Tama (especially Connections) for a few weeks, expect the paint to start coming off and fading. However, if it's really faded, you might want to re-paint it. I'm not an expert on this, so you might want to create a topic about it in Help For New Tama Owners.
2. DON'T use any kind of metallic marker on any Tama. I have made this mistake several times, and the result is a dirty, half-faded colour that won't come off whatever you do. Either paint it properly or leave the shell alone!
3. Avoid touching the screen with your fingers; the result is bad enough on Connections, but much worse on the iD (L).
HOW TO KEEP THE SHELL CLEAN
Use this routine every week, and your Tama's shell should stay clean, although this routine does not prevent wear.
1. Get some kitchen paper and slightly wet it, then wring it out.
2. Rub it all over your Tama CAREFULLY, avoiding getting it in the screen and battery compartment. You can do this with the Tama's battery still in.
3. Carefully dry your Tama using kitchen paper. You may also want to dry inside the battery compartment (not that it should be wet in the first place). If so, I recommend removing the batteries first.
HOW TO KEEP THE SCREEN CLEAN
This is quite simple. Simply spit on the screen, then rub it in with your sleeve/other clothing. Don't play with your iD L under the covers at night - your breath steams up the screen. Yes, I've tried it!
TAMA EMERGENCY KIT
I started carrying one of these around after my V4.5 ran out of batteries right as we were driving away from the house on an all-day trip. It's pretty simple; you can store it in any backpack or other bag you take around with you, or simply in your pocket. It's a good idea to put it in a sandwich bag so nothing spills on the batteries in it. Here is what it needs to contain:
Batteries for whatever version of Tama you have (vintages = I think LR44, Connections = CR2032, Color Tamas/Tama-Go = AAA alkaline batteries)
Screwdriver - check it works on your Tama first
Clear plastic sandwich bag - as well as one to carry your kit in, your need one to put your TAMA in if it starts raining
You can also add other stuff, if you need anything else.
BATTERY REPLACEMENT
Did you know, Tamas can get glitched or broken if you take the batteries out incorrectly? It's happened to me, and I hope it doesn't happen to anyone else!
To safely take batteries out:
If your Tama takes CR2032 (small round flat batteries), simply flick it out using a screwdriver, but not with too much force.
If your Tama takes AAA batteries, ease the batteries out using your fingernail. It should take about 2 seconds to get each battery out.
Take extreme care replacing LR44 batteries (smaller than CR2032, found in vintage Tamas) since I almost broke my Angel replacing the batteries!
I hope I helped you keep your Tama safe and clean!
~ Dazzmina ~
TOP TIPS
1. Wear is unavoidable; if you run a Tama (especially Connections) for a few weeks, expect the paint to start coming off and fading. However, if it's really faded, you might want to re-paint it. I'm not an expert on this, so you might want to create a topic about it in Help For New Tama Owners.
2. DON'T use any kind of metallic marker on any Tama. I have made this mistake several times, and the result is a dirty, half-faded colour that won't come off whatever you do. Either paint it properly or leave the shell alone!
3. Avoid touching the screen with your fingers; the result is bad enough on Connections, but much worse on the iD (L).
HOW TO KEEP THE SHELL CLEAN
Use this routine every week, and your Tama's shell should stay clean, although this routine does not prevent wear.
1. Get some kitchen paper and slightly wet it, then wring it out.
2. Rub it all over your Tama CAREFULLY, avoiding getting it in the screen and battery compartment. You can do this with the Tama's battery still in.
3. Carefully dry your Tama using kitchen paper. You may also want to dry inside the battery compartment (not that it should be wet in the first place). If so, I recommend removing the batteries first.
HOW TO KEEP THE SCREEN CLEAN
This is quite simple. Simply spit on the screen, then rub it in with your sleeve/other clothing. Don't play with your iD L under the covers at night - your breath steams up the screen. Yes, I've tried it!
TAMA EMERGENCY KIT
I started carrying one of these around after my V4.5 ran out of batteries right as we were driving away from the house on an all-day trip. It's pretty simple; you can store it in any backpack or other bag you take around with you, or simply in your pocket. It's a good idea to put it in a sandwich bag so nothing spills on the batteries in it. Here is what it needs to contain:
Batteries for whatever version of Tama you have (vintages = I think LR44, Connections = CR2032, Color Tamas/Tama-Go = AAA alkaline batteries)
Screwdriver - check it works on your Tama first
Clear plastic sandwich bag - as well as one to carry your kit in, your need one to put your TAMA in if it starts raining
You can also add other stuff, if you need anything else.
BATTERY REPLACEMENT
Did you know, Tamas can get glitched or broken if you take the batteries out incorrectly? It's happened to me, and I hope it doesn't happen to anyone else!
To safely take batteries out:
If your Tama takes CR2032 (small round flat batteries), simply flick it out using a screwdriver, but not with too much force.
If your Tama takes AAA batteries, ease the batteries out using your fingernail. It should take about 2 seconds to get each battery out.
Take extreme care replacing LR44 batteries (smaller than CR2032, found in vintage Tamas) since I almost broke my Angel replacing the batteries!
I hope I helped you keep your Tama safe and clean!
~ Dazzmina ~