Screwdriver size? (INSIDE THE TAMA)

TamaTalk

Help Support TamaTalk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
I use a 3mm Phillips Head Screwdriver for both modern and vintage Tamagotchi's screws and it works fine, but I believe a 2mm will still work just as good. ;)

 
Last edited by a moderator:
I use a 3mm Phillips Head Screwdriver for both modern and vintage Tamagotchi's screws and it works fine, but I believe a 2mm will still work just as good. ;)
...That seems a little big. You actually OPENED the tama, right? (Circuitry)

 
Well I have allways used a Phillips 3mm for my vintage ones and the Connexions. I would use the 3mm but the 2mm should be fine. Let us all know how it goes.

Regards

Jordboss

 
Well I have allways used a Phillips 3mm for my vintage ones and the Connexions. I would use the 3mm but the 2mm should be fine. Let us all know how it goes.

Regards

Jordboss
Well, it works on the four screws of the tamago.

 
Well done! Im glad that you manage to remove them from the Device!

Regards

 
Status
Not open for further replies.

Latest posts

Back
Top