tamagotchi_pal
Well-known member
What is a Tamagotchi Glitch?
-Unusual happenings on your Tamagotchi which were not programmed in by Bandai
-Pixels jumbling and messing up the screen
-Passwords/codes that are clarified to work not working
-Connecting with nobody
-Things happening at the wrong speed/times
What causes a Tamagotchi Glitch?
-Extreme heat or cold
-Dropping on the floor (or anywhere)
-Low battery
-Fiddling with the circuit boards
-Debugging
-Direct sunlight
-Dropping in water
How to stop a Tamagotchi Glitch
-If dropped in water, take your Tamagotchi apart up to the circuit board, removing the battery and put in it in a warm (not hot), dry place and leave it for a week (maximum effect). Then put it back together and it will be working
-If placed in extreme heat, take the battery out and put it in a cool, dark place, such as a cupboard for a week or so. Put it all back together and it should be working.
-If placed in exteme cold, wrap your Tamagotchi in a warm fabric such as a jumper. If the cold is extreme (eg. snow) lean your wrapped Tamagotchi against a radiator for no more than 30 mins, then move to a warm (not hot) place and leave for a few days. It should be working.
-If you have debugged, open your Tamagotchi up to the circuit board and get a brand new (or just very clean) rubber and rub thoroughly along the pencil lines, being careful not to damage your Tamagotchi. Blow off excess rubbings and put back together. It will be working.
-If you have scratched the circuit boards with anything other than a pencil, sorry. You will not be able to change this and you may need to replace your Tamagotchi
I made this guide to make sure that we have minimum glitches. If you have any questions regarding glitches or this data, PM me.
//TP
PS. Whew! That took AGES!
-Unusual happenings on your Tamagotchi which were not programmed in by Bandai
-Pixels jumbling and messing up the screen
-Passwords/codes that are clarified to work not working
-Connecting with nobody
-Things happening at the wrong speed/times
What causes a Tamagotchi Glitch?
-Extreme heat or cold
-Dropping on the floor (or anywhere)
-Low battery
-Fiddling with the circuit boards
-Debugging
-Direct sunlight
-Dropping in water
How to stop a Tamagotchi Glitch
-If dropped in water, take your Tamagotchi apart up to the circuit board, removing the battery and put in it in a warm (not hot), dry place and leave it for a week (maximum effect). Then put it back together and it will be working
-If placed in extreme heat, take the battery out and put it in a cool, dark place, such as a cupboard for a week or so. Put it all back together and it should be working.
-If placed in exteme cold, wrap your Tamagotchi in a warm fabric such as a jumper. If the cold is extreme (eg. snow) lean your wrapped Tamagotchi against a radiator for no more than 30 mins, then move to a warm (not hot) place and leave for a few days. It should be working.
-If you have debugged, open your Tamagotchi up to the circuit board and get a brand new (or just very clean) rubber and rub thoroughly along the pencil lines, being careful not to damage your Tamagotchi. Blow off excess rubbings and put back together. It will be working.
-If you have scratched the circuit boards with anything other than a pencil, sorry. You will not be able to change this and you may need to replace your Tamagotchi
I made this guide to make sure that we have minimum glitches. If you have any questions regarding glitches or this data, PM me.
//TP
PS. Whew! That took AGES!